Revolutionary Structural Insulated Panel House Kits
If you’ve ever priced traditional factory Structural Insulated Panels House Kits (SIPS), you’ll know that they run $7 to $9 per square foot. EZ SIPS do the same job, but cost $3.50 to $4.50 per square foot…for the entire wall—not just the insulation!
EZ SIPS Build-In-Place Structural Insulated Panels are a REVOLUTIONARY insulating solution for 3 reasons:
- They let you SUPER-INSULATE to R-25+ while you build
- You can build just the way you always have, with tilt-up framing, using regular lumber
- Exterior walls cost HALF THE PRICE of factory SIPS
Traditional structural insulated panel house kits need to be pre-ordered to spec, cost a lot, and require crane installation. If your slab is not perfectly square and level, you’ll also run into joining problems, requiring messy on-site modification or concrete grinding. On top of that, factory SIPS are a pain in the neck for trades: fishing wires through chases in the foam, and cutting holes in the oriented strand board (OSB).
Traditional SIPS consist of two sheets of OSB with a layer of foam in the middle. EZ SIPS are different. These Structural Insulated Panel House Kits are REVOLUTIONIZING the building industry by allowing traditional stick frame builders to super-insulate while they frame, creating their own SIPs right on the jobsite!
EZ SIPS are 4-foot wide, wall-height expanded polystyrene (EPS) panels. They are environmentally friendly, light, and structurally rigid. And at 6¾” thick they provide better insulation capability than traditional SIPS. EZ SIPS is a Structural Insulated Panel House Kit that just makes sense!
EZ SIPS have channels precisely routered out for studs on 16” centers, and top and bottom plates. They ease down into a stud wall, fitting it like a glove. Studs snug up into the grooves, resulting in a complete 1¾” THERMAL BARRIER between framing and sheathing. EZ SIPS also have pre-cut channels for electrical and plumbing. Pull out foam channels by hand, insert wiring, and replace with a squirt of foam or glue. EZ!
Where you have headers, king studs and other exposed wood, just glue on 1¾” EZ SHEETS for a COMPLETE THERMAL BARRIER on 100% of all exterior walls. If you’re looking for a low-cost, highly effective Structural Insulated Panel House Kit, EZ SIPS are the answer. Order the number and height of panels that you need and get building…just the way you always have! To find out more, give us a call at 1-888-SIPS-488 today!
