The SIP Building System of Choice for Stick Framers
Introducing a REVOLUTIONARY new approach to SIPS. EZ SIPS building systems are changing the way homes are built, allowing you to SUPER-INSULATE WHILE YOU FRAME! EZ SIPS Build-In-Place Structural Insulated Panels are 6¾” thick, 4-foot wide, wall-height expanded polystyrene EPS panels. They have routered channels for studs on 16” centers, and for top and bottom plates. Simply ease EZ SIP panels down onto your 2×6” wall built with regular lumber, sheathe it with OSB or plywood, and stand it up. It’s super easy…and you don’t have to change the way you build!
A revolutionary take on SIPs
Structural insulated panel (SIP) building systems now account for upwards of 12% of new home construction across North America. But traditional factory SIP kits have drawbacks: they cost $7 to $9 per square foot, they don’t fit together perfectly if your foundation is even ½” off level, and they are a pain in the ass for sub-trades. EZ SIPS walls cost $3.50 to $4.50 per square foot for the entire wall, including 2×6” lumber, foam panels and sheathing. That’s HALF THE COST of factory SIPS. EZ SIPS DIY SIP panels are the way to go!
EZ SIPS are a treat for trades. Within the exposed inner wall of foam you’ll find pre-cut channels for electrical, plumbing and bracing. Just pull out foam channels by hand and tuck in your wiring or plumbing. Put the blocks back with a dab of glue and you’re done! It’s that EZ!
EZ SIPS: A frame for wall building
EZ SIPS act as a wall-building jig. Slide your studs into the routered recesses at 16” on center, and nail home top and bottom plates. No need to measure! Bank together as many EZ SIPS panels as you need side-by-side for a COMPLETE THERMAL BREAK that stretches the entire length of your wall!
Now that’s a SIP building system with a BOMBPROOF BUILDING ENVELOPE! To find out more, give us a call at 1-888-SIPS-488 today!
